2001 Supercharged  Bullitt
Allen Engine Development now has  C.A.R.B. certified supercharger systems for the 4.6L
2 Valve Mustang Bullitt
.


6 PSI $4389 /  9 PSI $4789 
     Dealer inquiries  welcome

OEM Quality, Driveability and Dependability!
All 2001 Bullitt supercharger systems come complete with a one-piece cast aluminum manifold, air to water intercooler, mechanical water pump, Eaton M90 S-ported supercharger, integral bypass valve, fuel pump voltage booster, 30 lb/hr fuel injectors, billet fuel rails, custom chip, 70MM throttle body, intake tube, water pump pulley, alternator pulley and all brackets, belts, hoses and  hardware for an OEM quality installation.  9 PSI systems also include an upgraded mass air meter, smaller pulley, and custom chip.
All Allen systems use a built in bypass valve to reduce parasitic drag and noise during idle or cruise conditions.

C.A.R.B. E.O.#D423-4  --  50 State Legal

70-107 HP increase!
60-100LB/FT Torque increase @ 5000 RPM
35%-52% Peak Torque increase!
Full boost at 2000 RPM!
Stock Driveability!
0-60  4.8 Seconds @6 PSI
(Stock 5.6)
1/4 mile 13.3@108MPH @6 PSI (Stock 14.1@98MPH )
(For 6 & 9 PSI system, 9 PSI requires forged pistons)

All Allen Intercooled Supercharger systems use the Eaton M90 S-ported supercharger.  Eaton is the supercharger of choice for virtually all OEM's, including: Ford, Buick, Oldsmobile, Toyota TRD, Nissan, Aston Martin, BMW, Mercedes and Jaguar.  Super quiet and super dependable, with a one year warranty.
(Optional 3 year warranty available. )

Allen Engine Development
2521 B Palma Drive
Ventura, CA 93003 

WWW.ALLENENGINE.COM

Ph: 805-658-8262
Fx: 805-658-8645
allen@allenengine.com

Place an order for a
Supercharger System
or a Chip on our Secure Server HERE

To order our new Supercharger Catalog,
Click HERE

View the Installation Instructions HERE

BACK to Supercharger Listing

BACK to Allen Engine Home